Инспектор Ж/Д цистерн0.1.3.0 - Google Play

Inspector F / A tank calculator that allows you to calculate the amount of product loaded into tank cars of different types. Rail tank calibration table contains all the types of tanks: 14, 15, 16, 17, 18, 24, 25, 25a, 26, 26a, 27, 27a, 28, 29, 30, 31, 35, 35a, 37, 53, 53a , 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79 , 80, 81, 82, 83, 84, 85, 86, 87, 88, 90, 91, 92, 93, 94, 96, 97, 100, 101, 105, 106.

  If you need to get a lot of different fuels that meet the requirements of Table Volume Correction Factor 54B (fuel oil, diesel, gasoline, etc.), the current amount of mass can be converted into.

Simply select the type of car and the loading height of product in millimeters. Specify the density in g / cm ³ at 15, (NOT AT 20! Degrees and density based on the hydrometer, taken at the current temperature) and the temperature of the fuel, if you want to calculate the weight of the product.

WARNING:
In order to avoid misunderstandings. The density of the product, or, as they say, the weight must be specified at fifteen degrees Celsius - is a standard international method of calculation. In the near future will be added to the calculation for the standard density at 20 degrees for Russian passports quality.

Example calculation:
  Type of tank: 52
  Vzliv Fuel: 1230 mm
  Product temperature: 12.7 degrees Celsius.
  Product density: 0.9085 g/cm3 at 15 degrees Celsius. Usually specified in the Quality Certificate or, for example, it will give you your lab.

Then, with the data contained in the train 27,800 liters of fuel.
Temperature correction to this density and temperature: 1.0018, then the density of 12.7 degrees Celsius is (correction 1.0018 multiplied by the density of 0.9085): 0.9101

Volume of the product will be at fifteen degrees (Amendment 1.0018 multiplied by the current volume at 12.7 27,800) 27,850 liters.

Finally, the weight of the product (volume at fifteen degrees, 27,850 liters multiplied by the density at fifteen degrees 0.9085): 25 302 kg.

TIP:
If you measured the density of the product hydrometer directly in the tank, leave the temperature at fifteen degrees and set the current density on the hydrometer (In this case, you do not need a temperature correction. You already have a current density). This will put an amendment to one, and you get the real weight of the product.